Skip to main content

Should I start with DJI F550?

By
I'm thinking of starting my multicopter project again, with the DJI F550 Frame.

I'm currently looking at the following resources,

http://www.helipal.com/dji-flamewheel-f550-w-naza-v2-gps-drone-rtf.html
http://dronebly.com/the-ultimate-guide-to-dji-f550-hexacopter-things-you-need-to-know

And, the following videos,






And here's a very interesting video I found while looking for build guides for DJI F550. It shows a multicopter built with the F550 reaching an altitude of 1KM! The drone falls due to a technical glitch, but it achieving a 1KM altitude is awesome.


So, I'm determined to start with the F550 frame for my multicopter also.
Labels:

Comments

Post a Comment

Popular posts from this blog

Selecting the Correct Gauge Wires for your RC Models

By
When we are building RC models (aircrafts, multicopters etc.), something we typically overlook is what type of wires to use to distribute power in them. Usually, we try to reduce the weight of the model, so we tend to go with smaller wires. But, we cant expect to put in small circuit-wires and have them handle the amount of power needed. If you look at the wires that comes in the output leads of a Li-Po, or the wires that comes on a standard XT Jack, you'll notice that they're quite huge. Large gauge wires on a Li-Po and XT connectors These need to be huge to handle the amount of amperage that goes through them. So, we should also consider the amperage, and the length of wire needed when selecting the size (gauge) of the wires.
Post a Comment
Read more

What do the prop size numbers mean?

By
Have you been trying to shop for propellers - either online or at a hobby shop - and got confused of the numbering used to denote the size of the propellers? You see things like " 10 x 4.5 CW ", or " 8055 CCW ". What do these numbers mean? A 8 x 4.5 CW and CCW Propeller Set It's actually quite simple once you figure it out. The first number denotes the diameter of the prop (length from tip-to-tip). The second number denotes the pitch of the prop. Here, the pitch is denoted as a length, not a angle. Let's see how that works.
1 comment
Read more

RC Helicopter Gyro Explained

By
I recently bought a RC Helicopter - a Falcon 8911 4-Channel  RC with a built-in Gyroscope (Gyro for short). It's the first time I've seen a 4-Channel RC helicopter, let alone a one with a gyro, in the Sri Lankan market. The heli was pretty good, although I still need more 'flight training'. I will do a separate post on my heli ;) The thing that interested me most is the gyroscope. I knew the basic concept of a gyroscope but didn't know how it applied to helicopters. So I did a little research on the internet and found out a lot about gyros. To others who are interested, here's what I've learned. First of all, what is a gyro? A gyroscope is a device for measuring or maintaining orientation (a.k.a. angular position). The most basic is the mechanical gyro. A mechanical gyro is essentially a wheel spinning at a high rated speed and whose axle is free to take any orientation. Based on the principles of conservation of angular momentum, the orientation of
3 comments
Read more